How to Recondition A Car Battery At Home With a 3 Steps System

If you are reading this article, you may be one of those trying to figure out how to recondition a car battery from the comfort of your home.

Reconditioned Car Batteries

On average, a car battery should last about six years, but like most car parts, that all depends on how you treat it. Using electronics while the engine is off and multiple discharges shorten the life of a car battery, forcing you to replace the unit sooner.

But what if it was possible to bring back to life an old or dead battery? Well, this is possible if you consider reconditioning it. The technique requires no technical skills, and it saves you a few bucks and conserves the environment. You can also earn more by having a car battery reconditioning business in your place. Click here to read the EZ Battery Recondition Program Review

What are Reconditioned Car Batteries?

Typically, it refers to injecting new life and improving the charging capacity of the old or dead cells. Known for bringing back to life old car batteries, reconditioning helps you avoid the recurring expenditure of getting new units every year, providing you ample charge and saving you a lot of money.

Related: The complete Guide To Restore Any Type Of Battery

Golft cart Battery Reconditioning- 3 Crucial Steps You Must Use

Why People Throw their Car Batteries Right Away

People who throw their batteries right away lack the knowledge of how to recondition a car battery. Also, they are avoiding the inconvenience of using inefficient batteries.

What are the Main Benefits of Car Battery Reconditioning?

how to recondition a car battery

Typically, reconditioning the battery injects new life into it. But that is not all. The exercise has multiple benefits for the car owner. The practice is cost-effective. You will save a considerable amount when compared to acquiring a new battery. 

What’s more, by reconditioning the battery, you will be regulating wastes and pollution. For instance, lead content can pose health risks to groundwater and soil. As such, the benefits are manifold. 

The Complete Guide For Learning How to Recondition Car Batteries at Home

Do you know that battery reconditioning can be a DIY job? You can follow the following steps to facilitate the process in the comfort of your home.

Requirements

You will need different materials as listed below:

  • Bucket and Distilled water
  • Battery terminal cleaner 
  • Voltmeter
  • Apron 
  • Mask
  • Funnel and baking soda
  • Disposable rubber gloves and toothbrush
  • Battery charger
  • Flathead screwdriver and charger

Method

  • Before you begin to recondition your battery, ensure that you are wearing safety attires. As a precaution, you should use a water solution and weak baking soda as neutralizing agents in case of unintended splashes and spillage.
  • Again, ensure that battery terminals are corrosion-free. You can prepare a solution of baking soda and water to the ratio of 2:1. Using the toothbrush, dip it in the same solution and rub it against the battery terminals to eliminate corrosion traces.
  • After that, take the volt reading thanks to the voltmeter. A proper terminal connection is critical at this point. The black cable should connect to the negative terminal while the red one to the positive terminal.
  • The battery will be in the right condition if the voltage reading exceeds 12.6V. You will have to recondition it suppose the readings range from 10V to 12.6V.
  • Remove the battery cap using a flathead screwdriver. Secure the battery cap in a container to prevent misplacement. Gently lift the battery and empty the electrolyte in the bucket. 
  • Never dispose of the oil battery acid solution before neutralizing it with 500g of baking soda powder. 
  • Make a baking soda and water solution in the ratio of 2:1. Meanwhile, you can open the caps and empty the solution in the previous bucket. 
  • Using Epsom salt solution, replace the old electrolyte. 
  • Using 12V/2amps slow charging mode, recharge the reconditioned battery for at least 24 to 36 hours. After that, you should read the voltage using the voltmeter. The battery will be in the perfect condition if the readings range from 12.42V to 12.6V. 
  • Last but not least, you should now perform a load test. 

Frequently Asked Questions

Is There an Alternative for Epsom Salt Solution As an Electrolyte Solution? 

Yes. You can either use copper sulfate or Aluminum sulfate solution. 

Can You Use Gatorade or Vinegar In Case the Electrolyte Solution Is Low? 

No. Vinegar can form lead acetate, which interferes with normal battery functions. Alternatively, use distilled water. 

What Are the Right Readings for the Wholly Charged Battery? 

It should be 12.6V or more. 

Can I Overcharge My Car Battery? 

It is not right as your battery can malfunction. 

What Indicates That the Battery Is Flat Dead?

It will be flat dead if it reads at 12.0V.

Can you use a regular charger for the AGM battery?

No. It can overcharge and lead to its sudden death.