How To Recondition Batteries is a question that often asks, yet many people still believe that is not possible. Did you know that the global battery market size was valued at $108.4 billion in 2019 and is expected to grow at CAGR (compound annual growth rate) of 14.1% from 2020 to 2027?
The market growth is attributed to the high demand for new and replacement batteries from the industrial, automotive, and portable applications, including LCD displays, tablets, smartphones, and wearable devices such as fitness bands.
Battery replacement is an unavoidable fact of life for anyone who owns an electronic device. However, the introduction of new technologies has the rate of replacing batteries decrease over time.
One such technique is reconditioning, that is why we have seen there is a trend on how to recondition batteries. So many people are eager to learn the reconditioning method.
Known for bringing back to life old lithium-ion batteries, NiCad and NiMH rechargeable batteries, lead-acid car batteries, and AGM and Gel type batteries, this technique helps you avoid the recurring expenditure of getting new units every year, providing you ample charge and saving you a lot of money.
But is it as effective as it sounds? Well, in this guide, we are going to let the cat out of the bag so that you too can learn the reconditioning tricks and tips to get your batteries fully functional again. Click Here to Check out The EZ Battery Recondition Review Guide
Why Should You Recondition Battery?
The life expectancy of car batteries, laptop batteries, or even non-replaceable batteries varies between one and six years, but several factors can affect the estimate.
Even under the right conditions, chemical reactions cause the units to break down, and you will likely need to replace them sooner, which is an expensive undertaking. Other times, old devices will not even have replacement batteries available because they are no longer in stock.
Luckily, reconditioning allows you to refresh your batteries, preserving their function, so that they can work the same way as they used to, saving you money and time you would have used getting new units. Additionally, it helps reduce environmental pollution as batteries are extremely hard to recycle, and when dumped recklessly, they can spill chemicals, causing a huge impact to the well-being of the planet.
What Are Dangers Of Reconditioning Batteries?
You are likely to expose yourself to several dangers when you handle a battery incorrectly, especially without the right safety equipment, such as gloves and glasses, on.
In case of any leakage, these safety tools will protect you from sustaining burns on your skin. Other times, batteries explode when treated and mishandled poorly. So, avoid reconditioning a unit that’s leaking, cracked, or damaged. At that point, it is safe to dispose it and get a new one.
Although a recondition battery will last a few more years, it important that don’t revive it more than four times. As times goes by, it will eventually wear out, and you will experience diminishing returns every time you recondition it.
Here are the main hazards when working with car batteries:
- Battery Acid: It is corrosive and will burn your skin, eyes, or clothing when handled recklessly
- Flammable Gases: Car batteries release hydrogen gas, which is highly flammable.
- Electrical Shock: Car batteries are likely to spark when attaching jumper cables
- Weight: Some batteries are extremely heavy and should be handled cautiously
How To Recondition a Car Battery
Reconditioning a car battery is simple and fast because the tools are easily available. When done perfectly, your car battery can serve you for a long time without having to replace it as often.
Here are some safety equipment you will need when reconditioning a car battery:
- Apron or protective clothing
- Gloves that are resistant to chemicals and goggles
- A battery charger
- Basic tool kit that includes a screwdriver
- Two large plastic buckets
- Distilled water •
- Plastic funnel
- 1lb of Epsom salt
- 1lb of baking soda
- Steel wool
- Battery load tester (optional)
Procedure on how to recondition batteries:
To help you get the best out of your car battery in your shop or at home, we have come up with a step-to-step guide on how to recondition batteries:
- Step1: Prepare the battery by cleaning the terminals with a runny paste of baking soda and distilled water.
- Step2 :Check the voltage of your battery using a voltmeter. If the reading is below 12.6 volts, it’s fit for reconditioning, but if it reads 0, it is recommended that you replace the unit. •
- Step3: Empty the battery and clean the cells •
- Step4: Recondition the battery using Epsom salt and distilled water to create your own electrolyte. If you don’t have Epsom salt, use aluminum sulfate or copper sulfate. Then fill the cells with the mixture until they are 100% full. • • • Charge your reconditioned battery • •
Finally, test your car battery if it reads 12.43 volts or above. However, if the volts are below 12.43, continue charging the battery for another 12 hours.
Frequently Asked Questions On Batteries Reconditioning Guide:
- How Can I Diagnose a Dead Car Battery?
A dead battery has several signs such as your vehicle not starting or the radio and headlights not turning on.
- What Are the Reasons Why Car Batteries Fail?
More than half of premature battery failures come from poor maintenance, fluid loss, and overcharging and undercharging.
- How Long Does a Reconditioned Battery Last?
A reconditioned unit can last between five to 10 years. You can gain up to 12 years by reconditioning it.
- Can You Pour Gatorade or Vinegar If the Battery Electrolyte Solution Is Low?
Unfortunately, vinegar and Gatorade form lead acetate, causing more problems.
Is It Alright to Use a Regular Charger for Your AGM Battery?
It is recommended that you use the AGM charger instead of the normal charger when charging your AGM battery. The AGM charger has built-in microprocessors, which adjust to your battery’s requirements, ensuring it will not overcharge.
Final Thoughts on How to recondition Old batteries
It is evidently easy to prolong your battery life by reconditioning it. While there are many tools you need to invest in to get the job done, we recommend that you try out FOXWELL BT705, INNOVA 3340, EZRED SP101, Associated Equipment US20, or XS Power D6500 XS Series. If you still not sure on how do it yourself, try the EZ Battery Guide by Tom Ericson. Tom will coach you and gives you a complete blue print, you can even create your own battery businesss